++ RADIANTECH, INC. ++

The OT-5000 Optical Loss Tester is an advanced all-purposed optical tester. With built-in light source and precision optical power meter, OT-5000 allows testing fiber attenuation as a function of time, and hence large internal memories are needed if a trend is to be established. OT-5000's large internal memory and auto-memory function makes OT-5000 the most powerful T&M tool today. In the DC mode, it can be used for simple optical powder attenuation measurements with its built-in self-stabilized laser light source. The light source can also be used for a hands-free operation.

Features

Data storage up to 2,500 measurements
One-touch selection of relative or absolute power level
Auto range detect at 2 kHz, 1 kHz, 330 Hz, 270 Hz
Auto-memory allowing for data acquisition for a long time period
RITEST File Management Software featuring direct reporting and on-line monitoring

Peak-value display function with on/off toggle key
Adjustable average value readouts for the last 20 measurements
RS-232 or USB communication port
Ergonomic, eye-catching handheld package
Backlight LCD display
Built –in LED flashlight

Note:
All specifications are subject to change without notice.

Light Source Specifications

ITEM / MODEL	OT-5200 / OT-5300
Emitter	Laser Diode
Wavelength	1310 /1550 ± 30 nm
FWHM ( typ.)	5 nm
Output Power	≧ - 6.5 dBm (SMF)
Output Stability (1/8hr)	± 0.05 dB / ± 0.1 dB
Connector Type	FC or SC

Note: Measurements are made at 23±2°C

General Specifications

Dimensions ( L x W x H )	227(L) x 117(W) x 50(H) mm
Weight	800 g
Battery Power	12 hours –Continues power meter usage 8 hours –Continues Light source on 5 hours –Battery fully charged time
Temperature	Operating : 0 to + 50 ℃ Storage: -10 to + 60℃
Humidity	0 to 85% (Non-condensing)
Successive operation	Use AC adapter

Note: Measurements are made at 23±2°C

RITEST® Software

RITEST®, the complimentary software in exclusively for OT-5000 series. This software offers users with remote control and visual monitoring capabilities when measurement is on-line. With an RS-232 or USB cable, one can operate the OT-5000 remotely from a PC. Subsequently one can also store the measured date on a PC, or to retrieve the date later for analysis.